A150.2

2 CHANNEL LOW IMPEDANCE CLASS-D AMPLIFIERS

A Series is a compact, light and powerful Class-D amplifier range dedicated

to install market. From 2 channel to 16 channel inputs, a part of the line can

be equipped at request with ALS (Automatic Voltage Switch), optimizing

the energy consumption, as well as noise and distortion.

For higher fexibility options like Dante Ultimo, DSP and ErP (Energy related

Product) are also available at request (Only for AD/ADH Series).

 

Preset A500.2 Operaton Mode
1 2
OFF OFF STEREO
ON  OFF PARALLEL
OFF ON  BRIDGED
ON  ON  MUTE

Model A150.2
CHA-B (ONE Channel Drive) 4Ω (RMS)180Wx2
Stereo Mode
(All Channels Drive)
2Ω(EIAJ) 400Wx2
4Ω (RMS) 180WX2
8Ω(RMS) 100Wx2
Bridge Mono Mode 4Ω (EIAJ) 800W
8Ω (RMS) 360W
Input Sensitivity (Limiter Off) 0.9-1.1V(+0/-1dBv)
Input Impedance 20KΩ balanced or 10KΩ Unbalanced
Frequency Response (4Ω) 20Hz~20KHz (0+/-1dB)
Voltage Gain 28(+0/-0.5dB)
THD+N <0.1% (Ref. 1K 1/8 Rated Power, A-Weighted)
S/N Ratio >96dB
Crosstalk >70dB
Damping Factor >180
Protections Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads,
turn ON/OFF, muting, tried crowbar.
Controls Front: On/Off Power Switch, Volume channel A,B Rear: 4-preset modes (A-500.2)
Indicators Signal 2 green LED / Clip: 2 red LED / Power: green LED / Protection: 1 red LED / Bridged: I red LED / Prior:green / red LED.
Connectors Input: Active Balanced XLR or TRS Jack; Output: TRS and Speak-on 1 Euroblock
Power Supply AC:110-120V or 220~240V 50/60 Hz
Dimension (W x D x H) 483 x 281 x 44 mm (19.02" x 11.06" x 1.73")
Weight 3.7kg(8.16 Ibs)