VA42.12 SYSTEM

  • 1000W Continuous / 2000W program / 4000W peak class D
  • 130dB max SPL
  • Controls: IP Control / MP3 including
VA42.12 SYSTEM

  


VA42.12 is a new series of TOPPPRO professional active stage column speakers, using SUB+POLE+SAT-BM+SAT-TW as a system. The SAT column connection can be rotated 90 degrees left and right, without the need for external signal cables.
SUB adopts 15''2.5-core SUB WOOFER with inverted design. The box body is made of 15MM plywood, the surface is sprayed with black fine sand paint, the front is equipped with high-strength metal iron mesh, the bottom is equipped with rubber foot pads, and the wooden handles on both sides are convenient for moving and protecting the box.
SAT uses 4pcs 3.5" full-range speakers, with built-in connectors, SAT can be directly connected to SAT
AMP: CLASS-D 500W*2 power amplifier + DSP + MP3PLAER (with Bluetooth)
Front pole function 2 Combo-XLR 1/4” In, 1 RCA In L&R, 1 XLR Thru, and 1 Speakon Out, three presets FLX, V8, FLAT/USER, FLX with FLX5 array, V8 and FLAT with SOHO V8 sound column, FLAT users can adjust it by themselves, users can turn the EQ switch to FLAT/USER to adjust the sound effect they want when using the IP Control function

 
  • Total Amplifier Power700 W  Continuous / 1400W Program / 2800W Peak Class D @ 4 Ohms
  • Dispersion(-6dB) 100°Horizontal
  • DSP Presets Modes Center / Open / User
  • 2 Combo-XLR&1/4”
  • RCA In L&R
  • 1 XLR Thru&Mixout
  • Volume Control
  • Switch for Input sens
  • Swtich for mode selector
  • IP Control/MP3 and BT

 

Specification

System Type
12" Active Subwoofer Speaker Cabinet
Frequency Response(-6dB)
40Hz-500Hz
Total Amplifier Power
1000 WContinuous/2000W Program/4000W Peak Class D @ 4 0hms
Amplifier,Subwoofer
500 W Continuous/1000W Program/2000W Peak Class D @4 0hms
Amplifier, Satellite
500 W Continuous/1000W Program/2000W Peak Class D @4 0hms
DSP Presets
Center / Open / User
Sensitivity (1W/1M)
96dB
Maximum SPL@1M
130dB Max(Calculated)
Electronic Protections
Over heat Protection / Short Circuit Protection / Digital Compressor
Cooling
Temperature-controlled fan
Connections
Input:2 Combo-XLR&1/4",RCA In L&R,1 XLR Thru & Mixout
External Controls
Volume Control / Switch for Input sens / Swtich for mode selector/Power ON with Green LED / Limiter with Red LED / Ground Lift / IP Contro / MP3 / BT Player
Power Supply
110V/230V~50/60Hz
Enclosure Construction
Plywood Cabinet,Resistant Black Paint,Metal Grille with Foam, Rubber Feet,Integrated side handles
Mounting
Holder with Input Jacks for Pole
Dimensions(WxHxD)
379*500* 473mm (14.92"x 19.69"x 18.62")
Net Weight
21.5Kg (47.40 lbs)

Enclosure Construction
Plywood Cabinet, Resistant Paint, Metal Grille with Foam
Mounting
2 x Holder,1 x Input Connector for Sub, Another with Input Connector for Satellite
Dimensions(WxHxD)
700*106.6* 98mm(27.56" x 4.20"x 3.86")
Net Weight
2.70Kg (5.95 lbs)

System Type
3.5° Passive Speaker System
Output Power
120W Cominuous.240W Program.480W Psak
Sensitivity(1W/1M)
95dB
Maximum SPL @1m
122d8 Max (calauated)
Frequency Response(-6dB)
160Hz-20kHz
Impedance
8 ohms
Transducer Low
4x3.5Woofer,1.0(25.4mm Voice Corl
Crossover Frequency
500Hz
Dispersion(-6dB)
100°Horizontal
Attachment Points
Adjustable Rigging System, Horizontal Splay Rotation n -90°-0*-90°increments from 180
Connectors
Parallel or Series 6.3mm Socket / Selection Switch
Enclosure Construction
Plywood Cabinet,Resistant Paint,Metal Grile,with Foam
Mounting
2 x Holder,1x Input Connector for AX Pole,Another with Input Connector for AXV42TP
Dimensions (HxWxD)
448*106.6* 98mm(17.64"x4.20"x3.86")
Net Weight
3.48Kg (7.67 lbs)

System Type
3.5" Passive Speaker System
Output Power
120W Continuous,240W Program,480W Peak
Sensitivity (1W/1M)
95dB
Maximum SPL @1m
122dB Max.(calauated)
Frequency Response(-6dB)
160Hz-20kHz
impedance
8 ohms
Transducer Low
4 x 3.5" Woofer.1.0"(25.4mm) Voice Coil
Crossover Frequency
500Hz
Dispersion(-6dB)
100° Horizontal
Attachment Points
Adjustable Rigging System,Horizontal Splay Rotation in -90°-0°-90°increments from 180°
Connectors
Parallel or Series Φ6.3mm Socket / Selection Switch
Enclosure Construction
Plywood Cabinet,Resistant Paint, Metal Grille with Foam
Mounting
1 x Holder,1 x Input Connector for AX V42BM or AX Pole
Dimensions (HxWxD)
422*106.6* 98mm(16.61"x4.20"x3.86")
Net Weight
3.41Kg (7.52 lbs)

Download

newsletter