TPM6250MKII

TPM6250 is designed to be a portable solution that includes a mix, an amplifier. It builds with 300W power amplifier, built in 24-bit DSP effect with 100 presets, built-in compressor/ limiter, 7-band EQ and RCA I/O with dedicated volume control. They are designed to be rugged, powerful and filled with quality features that would usually be found in much large systems.

TPM6250MKII

  

  • 6 MIC/LINE input channels, 
  • Tape input with level control for recording level matching
  • 3-band channel EQ, Monitor and effect sends on each input channel
 
  • 7-band graphic equalizers/100DSP effects
  • Built-in feedback LOCATOR
  • USB port for MP3 player
  • 300W/4Ohm amplifier mono

Specification

Microphone input
Electronically Balanced,Discrete Input
Frequency Response
20Hz to 22kHz,+/-3dB
Gain
50dB
Line Input
Electronically balanced
Frequency Response
20Hz to 22kHz,+/-3dB
Gain
20dB

Microphone Input
1.5kOhm
All other input
10kOhm or greater
Tape Out
1kOhm
All other output
120 Ohm

Hi shelving
+/-15dB@12kHz
Mid shelving
+/-12dB@2.5kHz
Low shelving
+/-15dB@80Hz
Graphic EQ
7-band,4/3 octave

A/D and D/A converters
24 bits
DSP resolution
24 bits
Type of effects
Vocal, Small Room,Large Room,Echo,Echo +Verb,Flanger +Verb
Plate,Chorus +GTR,Rotary+GTR, Tremolo +GTR
Presets
100
Controls
100-position PRESET selector, CLIP LED,MUTE SWITCH with LED indicator

Noise(Bus noise)
Fader 0dB, channels muted:-85dBr(refL+4dBu)
Fader 0dB,all input channels assigned and set to UNITY gain:-81dBr(ref:+4dBu)
Monitor Max Out
+22 dBu unbalanced,1/4"jack
FX sends max out
+22 dBu unbalanced,1/4"jack

THD<0.5% at 1 watt output power; THD<1%watt output power

SNR(signal to noise ratio) set output line to 1kHz
>65dB

No Output power state at 230V
<50W

Output power
300W RMS at 1kHz,THD=1%,Load=40hm

Frequency Response
20Hz to 22kHz,+/-3dB

220V-240V/110V-127V-50/60Hz

Dimensions
TPM 6250MKII:410*220*274mm(16.34"*8.66"*10.79")
TPM 8250MKII480*220*274mm(18.98"*8.66"*10.79")
Net Weight
TPM 6250MKII: 9.70Kg(21.38lbs)
TPM 8250MKII10.80Kg(23.81lbs)

USB HOST
Builds in the USB FULL speed(12Mbps)HOSTcontrol function
Supports the USB mass storage class
FAT analysis
Supports FAT16 and FAT32
Supports VFAT(long file name)
Supports multi-partition up to1
MP3 DECODE
Supports sample rates 8KHz,16KHz,32KHz.11.025KHz,22.05KHz,44.1KHz,12KHz,24KHz and 48KHz.
Supports bit rate 8 to 320 kbps and VBR(Variable Bit Rate) except free format
Electric Specification
Frequency response : 20Hz~20KHZ
S/N Ratio : >90dB
Distortion(at 1 KHz) : <0.04%

Download

Back

newsletter