- AVS-966 work as the system host owing the function of managing system. And each system must be equipped with one host.
- Up to 42 zones can be extended for single AVS-966 system.Total 6 extension ports of PA OUT as well. Used to connect with extension amplifier. When connected to PX system extension amplifier, Only 2PCS PX can be connected to each PA OUT.
- Optional Dantes can be applied on the audio transmission & control of multi-systems
- Built-in 128 Flash can be used to save various alarming or tips voice.
- Two-way RD port can be used to connect remote MIC. Up to 4 paging or emergency micropphone can be connected.
- Three-way MIC/LINE input can be used to setup phantom power.
- 6-way emergency control inputs and general control inputs.
- Realize the fault-detection function for loudspeaker or related looping circuit. And the fault of devices connected to each ports can be detected automatically.
- Easy to set up the system with PC software.
- Either timing control or GPIO control can be used to control the playback & stop of built-in voice.
Specification
230V 50/60HZ
1100W Max consumption power
360W
50Hz-16KHz,+/-3dB(1/3 rated output)
≤0.7%(Rated output 1KHZ)
≥85dB
Input 1-3:-50dB*(MIC)/-10dB*(LINE)(rechangeable)
600Ω BGM 1-2:10 dB *10kΩ external AVP input:100V
600Ω BGM 1-2:10 dB *10kΩ external AVP input:100V
The total ouput power for loudspeaker CH1-6 isn't more than 360W.
And the Max ouputs applied on single channel =180W.
And the Max ouputs applied on single channel =180W.
Connected to AVS-64RFM / AVS-64RPM remote microphone.
Up to 300-meter distance between the unit and remote microphone can be connected via RJ45 female connector.
Recommended to use cable (CAT5-STP)
Up to 300-meter distance between the unit and remote microphone can be connected via RJ45 female connector.
Recommended to use cable (CAT5-STP)
AVS-906
N/A
AVS-966
Connected to AVS-966SA backup amplifier.
RJ45 female connector, The host and backup amplifier,
Recommended to use cable (CAT5-STP)
RJ45 female connector, The host and backup amplifier,
Recommended to use cable (CAT5-STP)
AVS-906
N/A
AVS-966
Total 6 ports and enable to connect with
the devices AVS-966EX/PX-150/300/450
the devices AVS-966EX/PX-150/300/450
Two-way inputs, Enable to be connected to fire-fighting center and receive message control.
Input 1-6:No-voltage contact input, short-circuit currents ,2 mA or much less
Output 1-6:Isolated open collector output, operating current: 10mA or less
AVS-906
Support
AVS-966
Optional Dante used to multi-system
network audio transmission & control
network audio transmission & control
AVS-906
Support
AVS-966
Loading PC firmware for system configuration
-5°C-+45°C
440x402x130 mm
17KG
Video
newsletter
Don't miss out!
Suscribe to our newsletter and never miss out on all the hot news.
Don't worry, our newsletter comes only once a week - on Monday's.