AVS-906

AVS series is a voice evacuation system certified in accordance with the EN54 fire protection standard. A perfect solution for PA evacuation systems that include zones. Dante compatible, and ethernet connection for PC software configuration and control. Among the principal functions, worth pointing out is emergency and evacuation announcements with zone control. System status check and loudspeaker line monitoring. Input and output DSP functions. Playback of pre-recorded messages, microphone and line inputs, and automatic switchover from the backup amplifier. AVS central amplifiers and extension samplifiers have 6 zones with independent volume.

AVS-906

  

  • Both Master amplifier and extension amplifier have total 360W output power and 6 output Zones.
  • Backup amplifier is available for Both Master amplifier and extension amplifier.Automatically switched to backup amplifier when master one faults.
  • The communication between Master amplifier and extension amplifier is base on DANTE network.
  • Maximum up to 32 PCS of Emergency MIC or Paging MIC configured simultaneously as well as 128 priority　level setting involved.
 
  • Maxim up to 256 Output Zones in one system.
  • Automatically fault detected: speaker Line /Control input connection/device local fault etc.
  • Record the fault event /emergency operation log automatically.
  • Automatically alarm audio message or normal audio message broadcast is available in this system.
  • Automatically alarm audio message or normal audio message broadcast is available in this system.
  • Easy to set up the system with PC software.

Specification

230V 50/60HZ

1100W Max consumption power

360W

50Hz-16KHz，+/-3dB(1/3 rated output)

≤0.7%(Rated output 1KHZ)

≥85dB

Input 1-3：-50dB*(MIC)/-10dB*(LINE)(rechangeable)
600Ω BGM 1-2:10 dB *10kΩ external AVP input：100V

The total ouput power for loudspeaker CH1-6 isn't more than 360W.
And the Max ouputs applied on single channel =180W.

Connected to AVS-64RFM / AVS-64RPM remote microphone.
Up to 300-meter distance between the unit and remote microphone can be connected via RJ45 female connector.
Recommended to use cable (CAT5-STP)

AVS-906
N/A
AVS-966
Connected to AVS-966SA backup amplifier.
RJ45 female connector, The host and backup amplifier,
Recommended to use cable (CAT5-STP)

AVS-906
N/A
AVS-966
Total 6 ports and enable to connect with
the devices AVS-966EX/PX-150/300/450

Two-way inputs, Enable to be connected to fire-fighting center and receive message control.

Input 1-6：No-voltage contact input, short-circuit currents ,2 mA or much less

Output 1-6：Isolated open collector output, operating current: 10mA or less

AVS-906
Support
AVS-966
Optional Dante used to multi-system
network audio transmission & control

AVS-906
Support
AVS-966
Loading PC firmware for system configuration

-5°C-+45°C

440x402x130 mm

17KG

Download

Video

Back

newsletter