PS-4806

PS-4806 is a Mixer/Amplifier Systems dedicated to paging applications. It features 6 paging zone outputs and 6 Mic/Line inputs including a power amplifier module of 480W.

80W x 6
100V x 6 / 4Ω x 1 OUT
4 Mic/Line IN, 2 Stereo Line IN
Priority Modes
MP3 Recorder & Player, FM radio
PM-01 / PM-06 Desktop Mic and Paging Station

Make an enquiry

Categories: Paging Amplifiers & Microphones, Paging Systems

PS-4806 is a mixer amplifier systems dedicated to paging applications. It features 6 paging zone outputs and 6 Mic/Line inputs including a power amplifier module of 480W. The power output is equally distributed and regulated among the selected channel. The maximum output is at maximum when “ALL ZONE” is selected for paging. The devices are equipped with MP3 player module with recording and FM radio function. The priority level can be se via the MP3 player screen interface, or through the computer control software. Mic/line inputs have individual volume/EQ controls, completed with a phantom power for electret microphones. External connections are also available for signal input. PM-06 is a paging station controlling up to six zones separately with an “ALL ZONE” function. PM-06 can also be used as a slave or as a master unit through a dip switch selector. In addition to the Mic input a RCA input is available for an external sound source. Audio signal is converted in AES3 through Cat5e cable which allows a distance connection over 100 meters. PM-06 has a built-in chime function where the sound can be modified by connecting the USB port to a PC. It can launch up to 6 messages stored in the PS main frame and controls over Play/Stop/Repeat functions.

MODEL	PS-4806
AC Power	110-240V~50Hz/60Hz
Input Sensitivity (+/- 1.5dBV)	MIC 1-4:-52dBV / LINE 1-4:-10dBV / LINE 5-6: -6dBV, Telephone emergency: -12dBV
S/N Ratio (20-20kHz, +/- 1.5dBV)	MIC: 60dB / LINE: 70dB
Frequency Response (-3dBV)	80Hz-16kHz
THD + N	<1%
Tone Control (+/-1.5dBV)	BASS@100Hz: +/-10dB / TREBLE@10kHz: +/-10dB
Phantom Supply (+/-2.5dBV)	MIC (Balanced): 24V
Rec. / Pre Out / AMP. In (+/-0.2dBV)	1V
Power Output (+/-0.5%)	480W@4 Ohms
Zone Power Output (+/-0.5%)	80W@70V or 100V
Power Consumption	680W
MP3 Decoder (USB/SD)	Built-in USB Full speed (12Mbps)
	Supports USB mass storage class
	Supports MMC, mini-SD and micro-SD cards
	Support MP3 / WMA / ACC format Priority SD>USB
	It’s recommended to use less than 32GB for MP3 or SD card
	Supports SDHC memory cards
	Supports FAT32, FAT16 and FAT12 file system
	Supports the file size up to (2G-1) byte
MP3 Encoder	Supports MP3 format encode (MPEGI Layer3)
	Supports the writing of the encoded file to USB or SD card
	Supports sample rate of 48kHz
	Encoding bit rate 320kbps
FM	Frequency range: 87.5 -108.0 MHz / STEP:100 kHz
FM	MONO=1, and L=R; delta f=75kHz; VEMF=1mV, FMOD=1kHz, 75 micro s de-emphasis
CHIME, MESSAGE	Supports MP3 file, Sample rate 44.1 kHz, Bit rate 22Kbps, 16bit
Front Panel Controls	4 MIC & 2 Line input Volume/Treble/Bass,
	1 Chime Volume, 1 Chime switch,
	1 Tel. ringer, 1 Tel. Switch,
	1 Siren Volume, 2 Siren Selector Switches,
	1 Master Volume,
	6 Zone Volume, 6 Zone Selector Switches, 1 All Zone Selector Switch,
	MP3+FM player with recording priority setting
Rear Panel Connections	4 MIC Inputs, 4 Gain Controls, 4 Phantom Power Switches,
	2 Line Inputs,
	1 Rec. Output, 1 Pre Output,
	1 Amp Input,
	1 PM-01 Input, 1 PM-06 Input,
	FM Antenna Terminal,
	USB Port and Switch, external control connection for signal input,
	6 Zone Outputs, 14 Outputs,
	Tel. Ringer & Input,
	100V Input,
	24V DC Output, Power Remote Control, AC Power Input.
Dimension (W x D x H)	444 x 367 x 130 mm (17.48“ x 14.45“ x 5.12“)
Weight	15.1 kg (33.29 lb.)