OWL-12A is an active speaker dedicated to mobile applications. Made of polypropylene and featuring a built-in Class-D amplifier, the system is light and compact while delivering 250W.
The cabinet features a 12” woofer plus a 1” neodymium driver coupled to a 90°H x 60°V horn.
All settings are located on the rear panel including the power switch, the volume control, the ground lift and a “contour” switch. A combo XLR/ ¼” jack makes easy the connection to a microphone or line signal, plus a pair of RCA for a stereo source. A blank plate covers a space for an optional MP3 or Bluetooth module.
Power Amplification |
Class-D 250W Continuous (200W L + 50W HF), 500W Peak (400W LF + 100W HF) |
Maximum SPL @ 1m |
117dB Continuous / 120dB Peak |
Frequency Response |
65Hz – 19kHz (-3dB) |
Frequency Range |
55Hz – 20kHz (-10dB) |
Transducer Low |
12" (310mm) Woofer, 2" (50mm) Voice Coil |
Transducer High |
Neodymium Driver , 1" (25mm) Exit with 1" (25mm) Voice Coil |
Horn Coverage ( H x V ) |
90° x 60°, nominal (-6dB) |
Crossover |
2.5kHz |
Connectors |
1 x Line/Mic Female XLR-1/4'' combo-RCA L/R inputs, 1 x Loop-Out Male XLR |
External Controls |
Volume, Power Switch with LED Indicator, Clip/Limit LED, Ground Lift, Contour On/Off, Mp3 Module Option |
Protection |
Thermal , Overload, Limiter, Compressor |
Power Supply |
AC-220/240V or AC-110/120 Volt, with Switching Power Mode, 50/60Hz |
Enclosure Construction |
Trapezoidal with Floor Monitor Capability / Injection-molded Polypropylene Enclosure; Perforated steel grille. |
Mounting information |
Integrated Pole Socket (36mm diameter); 3 handles; 4 M10 Threaded Sockets (2 top, 2 bottom) |
Dimensions (H x W x D) |
606 x 380 x 342 mm (23.8" x 14.9" x 13.4") |
Weight (Net/Shipping) |
13.2 kg (29.1 lbs.) / 15.2 kg (33.5 lbs.) |