AH1000.2 and AH1500.2 offer both low impedance and high voltage outputs. They deliver 900W and 1500W / 4 Ω respectively and can be used as powerful sources to drive large speaker system in various working modes.
Featuring Class-D amplification, both models offer high power efficiency with reduced noise and distortion. They also can drive 2Ω loads. In bridge mode AH1500.2 delivers 2800W / 4Ω. A built in cross-over filter can be adjusted for cutoff frequencies from 50Hz to 250Hz. 4 Dip switches selects preset modes like Stereo, Parallel, Mono Bridge and 70V /100V.
AH1000.2 and AH1500.2 offer both low impedance and high voltage outputs. They deliver 900W and 1500W / 4 Ω respectively and can be used as powerful sources to drive large speaker system in various working modes.
Featuring Class-D amplification, both models offer high power efficiency with reduced noise and distortion. They also can drive 2Ω loads. In bridge mode AH1500.2 delivers 2800W / 4Ω. A built in cross-over filter can be adjusted for cutoff frequencies from 50Hz to 250Hz. 4 Dip switches selects preset modes like Stereo, Parallel, Mono Bridge and 70V /100V.
AH1000.2 and AH1500.2 offer both low impedance and high voltage outputs. They deliver 900W and 1500W / 4 Ω respectively and can be used as powerful sources to drive large speaker system in various working modes.
Featuring Class-D amplification, both models offer high power efficiency with reduced noise and distortion. They also can drive 2Ω loads. In bridge mode AH1500.2 delivers 2800W / 4Ω. A built in cross-over filter can be adjusted for cutoff frequencies from 50Hz to 250Hz. 4 Dip switches selects preset modes like Stereo, Parallel, Mono Bridge and 70V /100V.
| MODEL |
|
AH-1000.2 |
AH-1500.2 |
| Power
(Both channels driven) |
2Ω (EAJ) |
2000 W x 2 |
2800 W x 2 |
| 4Ω (RMS) |
900 W x 2 |
1500 W x 2 |
| 8Ω (RMS) |
600 W x 2 |
900 W x 2 |
| Bridge Mono Mode |
4Ω (EAJ) |
4000 W |
1800 W |
| 8Ω (RMS) |
1800 W |
1000 W |
| Input Sensitivity (Limiter Off) |
|
0.9 - 1.1V (+0/-1dBv) |
| Input Impedance |
|
20kΩ balanced or 10kΩ unbalanced |
| Frequency Response (4Ω) |
|
20Hz~20kHz (+0/-1dB) |
| Voltage Gain |
|
AH1000.2 : 37 (+/-0.5dB) ; AH1500.2 : 38 (+/-0.5dB) |
| THD + N (Ref. 1kHz 1/8 Rated Power, A-Weighted) |
|
<0.1% |
| S/N Ratio (Ref. 1kHz, A-Weighted) |
|
> 100dB |
| Crosstalk (Below Rated Power) |
|
> 70dB |
| Damping Factor (1kHz, 8W) |
|
> 200 |
| Power/Output Circuity |
|
Switching Power Class-D |
| Protections |
|
Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar |
| Controls |
|
Front: AC switch, Input level control for each channel - Rear: STEREO - PARALLEL - BRIDGE - 70/100V - MUTE selector, SUB-X-OVER selector |
| Indicators |
|
SIGNAL : 2 green LED |
|
CLIP :2 red LED |
|
POWER/STANDBY: 1 changeable LED |
|
PROTECTION: 2 red LED |
| Connectors |
|
Inputs: Combo Balanced XLR - ¼‘‘ TRS |
|
Outputs: Speakon |
| Power Supply |
|
AC:110~120V or 220~240V 50/60 Hz |
| Dimension (W x D x H) |
|
AH1000.2 : 483 x 360 x 44 mm - AH1500.2 : 483 x 446 x 44 mm |
| Weight |
|
AH1000.2 : 5.7 kg - AH1500.2 : 6.1 kg |
