ULTIMO-2/4

ULTIMO-2/4 is an optional module used to extend the communication capabilities of audio devices by enabling bi-directional audio transport such as 2/4 channel inputs and 2/4 channel outputs.

  • 2 x 2 / 4 x 4 audio channels
  • Very low latency
  • Plug and play
  • 100Mbps with redundancy

 

Make an enquiry
ULTIMO-2/4 is an optional module used to extend the communication capabilities of audio devices by enabling bi-directional audio transport such as 2/4 channel inputs and 2/4 channel outputs. It is based on Dante format which is a combination of software, hardware, and network protocols that deliver uncompressed, multi-channel, low-latency digital audio over a standard Ethernet network. It incorporates features such as automatic device discovery, plug and-play networking, user-editable device names, channel labels and software bases audio routing. The ULTIMO-2/4 used a 100Mbps communication rate with a redundant network connection via switch. The Green and Yellow Led on the RJ45 connectors inform about the working status including connection and data transfer.
ULTIMO-2/4
Plug and play media networking
Very low latency, microsecond synchronisation
Works with standard off-the-shelf network switches
Rich set of control interfaces includes SPI, UART, and GPIO
Supports 2x2 / 4x4 channels
Broad sample rate support from 44.1 to 96kHz
Support for 16, 24 and 32-bit audio (per device or per channel)
Support for AES67 RTP audio transport
Remote Signal Presence Indication
Support for Device Lock
Latency monitoring
Clock health reporting
Highly interoperable: works seamlessly with any other Dante-powered device
Enables routing, event, and control management via the Host CPU interface
Firmware upgradeable