B-1000.4

B1000.4 is a four channel high power digital amplifier featuring 1000 W per channel into a 4Ω load. It has been designed to drive large speaker systems like Array satellites or subwoofers.

  • 1000 W x 4 /4Ω
  • Class-D
  • Stereo / Bridge / Parallel mode

 

Make an enquiry
B1000.4 is a four channel high power digital amplifier featuring 1000 W per channel into a 4Ω load. It has been designed to drive large speaker systems like Array satellites or subwoofers. Using high current switching power and Class-D amplification modules, B1000.4 offers high power efficiency with reduced noise and distortion.  
MODEL B-1000.4
Power (All channels Driven) 1000 W x 4 /4Ω (RMS)
500 W x 4 /8Ω (RMS)
Input Sensitivity (Limiter Off) 0.9 - 1.1V (+0/-1dBv)
Input Impedance 20kΩ balanced or 10kΩ unbalanced
Frequency Response (At 10dB below Rated Output Power 8 Ω) 20Hz~20kHz (+0/-1dB)
Voltage Gain 37 (+/-0.5dB)
THD + N (Ref. 1kHz 1/8 Rated Power, A-Weighted) <0.05%
S/N Ratio (Ref. 1kHz, A-Weighted) > 100dB
Crosstalk (Below Rated Power) > 70dB
Damping Factor (1kHz, 8W) > 200
Power/Output Circuity Switching Power Class-D
Protections Full short circuit, open circuit, thermal, ultrasonic, RF protection
Stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar
Controls Front: Front: AC switch (soft-start), Input level control
Rear: bridge / stereo / parallel selector
Indicators POWER: 2 green LED - SIGNAL : 4 green LED - CLIP: 4 red LED - PROTECTION: 4 red LED
Connectors Inputs:  NEUTRIK COMBO XLR/TRX
Outputs: SPEAKON
Power Supply AC: 110-120V or 220~240V 50/60Hz
Dimension (W x D x H) 483 x 360 x 88 mm
Weight 12.0 kg