AXV-62.15 PRO is a line array design PA system consisting on 2 x 15’’ active subwoofers and a passive column equipped with 24 x 3’’ drivers. This powerful system delivers 4000W Program. It is an ideal solution for large venues where vertical directivity is critical.
| MODEL | AXV-62.15 PRO System |
| Frequency Response | 35 Hz-20 kHz (- 10dB) |
| Total Amplifier Power | 2000 W Continuous / 4000 W Program / 8000 W Peak Class-D @ 4 Ohms |
| Maximum SPL@1m | 134dB |
| Crossover Frequency | 200Hz |
| Dispersion (-6dB) | 130° Horizontal |
| Dimensions (W x H x D) | 460 X 2010 x 676 mm (18.11” x 79.13” x 26.60”) |
| Net Weight | 50.15 kg (110.56 lbs) |
| MODEL | AXV-62.15 PRO SUB |
| System Type | 2 x 15’’ Active Subwoofer Speaker Cabinet |
| Frequency Response | 35 Hz-180 Hz (- 6dB) |
| Total Amplifier Power | 2000 W Continuous / 4000 W Program / 8000 W Peak Class-D @ 4 Ohms |
| Amplifier, Subwoofer | 1000 W Continuous / 2000 W Program / 4000 W Peak Class-D @ 4 Ohms |
| Amplifier, Satellites | 1000 W Continuous / 2000 W Program / 4000 W Peak Class-D @ 4 Ohms |
| DSP Presets | LIVE / MUSIC / SPEECH / DJ |
| Electronic Protections | Over heat / Short Circuit / Digital Compression |
| Cooling | Temperature-controlled fan |
| Connections | IN: 4 x Combo-XLR/1/4” IN, 1 x RCA L&R IN, 1 x 3.5mm Stereo Jack |
| OUT: 1 XLR THRU and MIXOUT, 1 X Speakon Satellite | |
| External Controls | Volume Control / Switch for Input sensitivity / Switch for mode selection. |
| Power ON with Green LED / Limiter with Red LED / Ground Lift | |
| OLED DSP Display and Control / IP Control / MP3 and BT (option) | |
| Power Supply | 115V / 230V ~ 50/60Hz Power switching |
| Enclosure Construction | Plywood Cabinet, Resistant Black Paint, Metal Grille with Foam, Rubber Feet, Integrated side handles |
| Mounting | Smart Mounting and Connection |
| Dimensions (W x H x D) | 460 x 830 x 676 mm (18.11” x 32.67”x 26.60”) |
| Net Weight | 40.47 kg (89.22 lbs) |
| MODEL | AXV-62.15 PRO SAT |
| System Type | 24 x 3” Passive Speaker |
| Output Power | 480W Continuous, 960W Program, 1920W Peak |
| Sensitivity (1W/1m) | 99dB |
| Frequency Response | 150 Hz-20 kHz (- 6dB) |
| Impedance | 4 Ohms |
| Transducer | 3” Neodymium Full range speaker, 0.8” (20.4mm) Voice Coil |
| Enclosure Construction | Aluminium Cabinet, Metal Grille, Resistant Paint |
| Connector | 2 Pin Smart Connection |
| Dimensions (f x H ) | f 167 x 1170 mm (f 6.57” x 46.06”) |
| Net Weight | 9.7 kg (21.38 lbs) |
