AXV-42

AXV-42 is a line array design PA system featuring a 12’’ powered subwoofer and a passive column made of three boxes overlaid in one single array. The top and middle satellites are equipped with 3.5’’ drivers and can rotate 90° left and right in order to change the horizontal dispersion. The bottom part of the column is used as a pole mount for the two upper satellites. The rotation system of the speakers is patented to assure the robustness of the mechanical parts and the quality of electrical contacts. The subwoofer AXV-42SA is equipped with two Class-D 350W amplifiers driven the 12” transducer and both satellites. All controls, inputs and outputs are accessible on the back panel of the subwoofer. 2 x Mic/Line inputs are available on Combo XLR/ ¼” jack plus a RCA connection for a stereo line. The system is equipped with a built in DSP featuring a switch with Center, Open and User positions. Center is used for standard coverage application. Open is set when the satellites are rotated. The third position allows the user to program his own settings via a PC connection.

MODEL	AXV-42SA
System Type	12’’ Active Subwoofer Speaker Cabinet
Frequency Response	40 Hz-500 Hz (- 6dB)
Total Amplifier Power	700 W Continuous / 1400 W Program / 2800 W Peak Class-D @ 4 Ohms
Amplifier, Subwoofer	350 W Continuous / 700 W Program / 1400 W Peak Class-D @ 4 Ohms
Amplifier, Satellites	350 W Continuous / 700 W Program / 1400 W Peak Class-D @ 4 Ohms
DSP Presets	Center / Open / User
Sensitivity (1W/1m)	96dB
Maximum SPL@1m	130dB
Electronic Protections	Over heat / Short Circuit / Digital Compression
Cooling	Temperature-controlled fan
Connectors	2 x Combo-XLR/1/4” IN, RCA L&R IN, 1 XLR THRU and MIXOUT
External Controls	Volume Control / Switch for Input sensitivity / Switch for mode selection / Power ON with Green LED / Limiter with Red LED / Ground Lift / IP Control
Power Supply	115V / 230V ~ 50/60Hz Power switching
Enclosure Construction	Plywood Cabinet, Resistant Black Paint, Metal Grille with Foam, Rubber Feet, Integrated side handles
Mounting	Holder with input Jacks for pole
Dimensions (W x H x D)	379 x 500 x 473 mm (14.92” x 19.69” x 18.62”)
Net Weight	21.5 kg (47.40 lbs)
MODEL	AX Pole
Enclosure Construction	Plywood Cabinet, Resistant Black Paint, Metal Grille with Foam
Connector	2 x Electronic Adaptor - 1 x Input Connector for Sub & 1 x Input Connector for Satellite
Dimensions (W x H x D)	700 x 106 x 98 mm (27.56” x 4.20” x 3.86”)
Net Weight	2.7 kg (5.95 lbs)
MODEL	AXV-42BM (Bottom box) / AXV-42TP (Top box)
System Type	3.5” Passive Speaker
Output Power	120W Continuous, 240W Program, 480W Peak
Sensitivity (1W/1m)	95dB
Maximum SPL@1m	122dB
Frequency Response	160 Hz-20 kHz (- 6dB)
Impedance	8 Ohms
Transducer	4 x 3.5”, 1” (2.54mm) Voice Coil
Crossover Frequency	500 Hz
Dispersion (-6dB)	100° Horizontal
Enclosure Construction	Plywood Cabinet, Resistant Black Paint, Metal Grille with Foam
Connectors	AXV-42BM : 2 x Electronic Adaptor – 1 x Input Connector for AX Pole & 1 x Input Connector for AXV-42TP AXV-42TP: 1 x Electronic Adaptor – 1 x Input Connector for AXV-42BM or AX Pole.
Dimensions (W x H x D)	AXV-42BM: 448 x 107 x 98 mm (17.64” x 4.20” x 3.86”) / AXV-42TP : 422 x 107 x 98 mm (17.61” x 4.20” x 3.86”)
Net Weight	AXV-42BM: 3.48 kg (7.67 lb) / AXV-42TP : 3.41 kg (7.52 lb)