AH1000.2 / AH1500.2

AH1000.2 and AH1500.2 offer both low impedance and high voltage outputs. They deliver 900W and 1500W / 4 Ω respectively and can be used as powerful sources to drive large speaker system in various working modes.

  • 1500 W x 2 /4Ω – 900 W x 2 / 4Ω
  • 70V / 100V
  • Class-D
  • Built-in Crossover
  • Stereo : Parallel / Bridge Mono modes

 

Make an enquiry
AH1000.2 and AH1500.2 offer both low impedance and high voltage outputs. They deliver 900W and 1500W / 4 Ω respectively and can be used as powerful sources to drive large speaker system in various working modes. Featuring Class-D amplification, both models offer high power efficiency with reduced noise and distortion. They also can drive 2Ω loads. In bridge mode AH1500.2 delivers 2800W / 4Ω. A built in cross-over filter can be adjusted for cutoff frequencies from 50Hz to 250Hz. 4 Dip switches selects preset modes like Stereo, Parallel, Mono Bridge and 70V /100V.   AH1000.2 and AH1500.2 offer both low impedance and high voltage outputs. They deliver 900W and 1500W / 4 Ω respectively and can be used as powerful sources to drive large speaker system in various working modes. Featuring Class-D amplification, both models offer high power efficiency with reduced noise and distortion. They also can drive 2Ω loads. In bridge mode AH1500.2 delivers 2800W / 4Ω. A built in cross-over filter can be adjusted for cutoff frequencies from 50Hz to 250Hz. 4 Dip switches selects preset modes like Stereo, Parallel, Mono Bridge and 70V /100V.   AH1000.2 and AH1500.2 offer both low impedance and high voltage outputs. They deliver 900W and 1500W / 4 Ω respectively and can be used as powerful sources to drive large speaker system in various working modes. Featuring Class-D amplification, both models offer high power efficiency with reduced noise and distortion. They also can drive 2Ω loads. In bridge mode AH1500.2 delivers 2800W / 4Ω. A built in cross-over filter can be adjusted for cutoff frequencies from 50Hz to 250Hz. 4 Dip switches selects preset modes like Stereo, Parallel, Mono Bridge and 70V /100V.
MODEL AH-1000.2 AH-1500.2
Power (Both channels driven) (EAJ) 2000 W x 2 2800 W x 2
(RMS) 900 W x 2 1500 W x 2
(RMS) 600 W x 2 900 W x 2
Bridge Mono Mode (EAJ) 4000 W x 2 1800 W x 2
(RMS) 1800 W x 2 1000 W x 2
Input Sensitivity (Limiter Off) 0.9 - 1.1V (+0/-1dBv)
Input Impedance 20kΩ balanced or 10kΩ unbalanced
Frequency Response (4Ω) 20Hz~20kHz (+0/-1dB)
Voltage Gain AH1000.2 : 37 (+/-0.5dB) ; AH1500.2 : 38 (+/-0.5dB)
THD + N (Ref. 1kHz 1/8 Rated Power, A-Weighted) <0.1%
S/N Ratio (Ref. 1kHz, A-Weighted) > 100dB
Crosstalk (Below Rated Power) > 70dB
Damping Factor (1kHz, 8W) > 200
Power/Output Circuity Switching Power Class-D
Protections Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar
Controls Front: AC switch, Input level control for each channel - Rear: STEREO - PARALLEL - BRIDGE - 70/100V - MUTE selector, SUB-X-OVER selector
Indicators SIGNAL : 2 green LED
CLIP :2 red LED
POWER/STANDBY: 1 changeable LED
PROTECTION: 2 red LED
Connectors Inputs: Combo Balanced XLR - ¼‘‘ TRS
Outputs: Speakon
Power Supply AC:110~120V or 220~240V 50/60 Hz
Dimension (W x D x H) AH1000.2 : 483 x 360 x 44 mm - AH1500.2 : 483 x 446 x 44 mm
Weight AH1000.2 : 5.7 kg - AH1500.2 : 6.1 kg