B2000.2 and D-2000.2 are stereo high power digital amplifiers featuring 2000W per channel into a 4Ω load. They have been designed to drive large speaker systems like Array satellites or subwoofers.
B-2000.2 / D-2000.2
B2000.2 and D-2000.2 are stereo high power digital amplifiers featuring 2000W per channel into a 4Ω load. They have been designed to drive large speaker systems like Array satellites or subwoofers. Using two independent high current switching power and Class-D amplification modules, both amplifiers offer high power efficiency with reduced noise and distortion. D-2000.2 is equipped with USB for remote control.
| MODEL | B-2000.2 / D-2000.2 | |
| Power (Both channels Driven) | 2000 W x 2 /4Ω (RMS) | |
| 1200 W x 2 /8Ω (RMS) | ||
| Input Sensitivity (Limiter Off) | 0.9 - 1.1V (+0/-1dBv) | |
| Input Impedance | 20kΩ balanced or 10kΩ unbalanced | |
| Frequency Response (At 10dB below Rated Output Power) | 20Hz~20kHz (+0/-1dB) | |
| Voltage Gain | 40dB (+/-0.5dB) | |
| THD + N (Ref. 1kHz 1/8 Rated Power, A-Weighted) | <0.1% | |
| S/N Ratio (Ref. 1kHz, A-Weighted) | > 100dB | |
| Crosstalk (Below Rated Power) | > 70dB | |
| Damping Factor (1kHz, 8W) | > 200 | |
| Power/Output Circuity | Switching Power Class-D | |
| Protections | Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar | |
| Controls | Front: Front: AC switch (soft-start), Input level control | |
| Rear: stereo / parallel selector | ||
| Indicators | POWER: 2 green LED - SIGNAL : 2 green LED - CLIP: 2 red LED - PROTECTION: 2 red LED | |
| Connectors | Inputs: NEUTRIK COMBO XLR/TRX - USB (D-2000.2) | |
| Outputs: SPEAKON | ||
| Power Supply | AC: 110-120V or 220~240V 50/60Hz | |
| Dimension (W x D x H) | 483 x 360 x 44 mm | |
| Weight | 5.0 kg | |
