B1000.4 is a four channel high power digital amplifier featuring 1000 W per channel into a 4Ω load. It has been designed to drive large speaker systems like Array satellites or subwoofers.
- 1000 W x 4 /4Ω
- Class-D
- Stereo / Bridge / Parallel mode
B-1000.4
B1000.4 is a four channel high power digital amplifier featuring 1000 W per channel into a 4Ω load. It has been designed to drive large speaker systems like Array satellites or subwoofers. Using high current switching power and Class-D amplification modules, B1000.4 offers high power efficiency with reduced noise and distortion.
| MODEL | B-1000.4 | |
| Power (All channels Driven) | 1000 W x 4 /4Ω (RMS) | |
| 500 W x 4 /8Ω (RMS) | ||
| Input Sensitivity (Limiter Off) | 0.9 - 1.1V (+0/-1dBv) | |
| Input Impedance | 20kΩ balanced or 10kΩ unbalanced | |
| Frequency Response (At 10dB below Rated Output Power 8 Ω) | 20Hz~20kHz (+0/-1dB) | |
| Voltage Gain | 37 (+/-0.5dB) | |
| THD + N (Ref. 1kHz 1/8 Rated Power, A-Weighted) | <0.05% | |
| S/N Ratio (Ref. 1kHz, A-Weighted) | > 100dB | |
| Crosstalk (Below Rated Power) | > 70dB | |
| Damping Factor (1kHz, 8W) | > 200 | |
| Power/Output Circuity | Switching Power Class-D | |
| Protections | Full short circuit, open circuit, thermal, ultrasonic, RF protection | |
| Stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar | ||
| Controls | Front: Front: AC switch (soft-start), Input level control | |
| Rear: bridge / stereo / parallel selector | ||
| Indicators | POWER: 2 green LED - SIGNAL : 4 green LED - CLIP: 4 red LED - PROTECTION: 4 red LED | |
| Connectors | Inputs: NEUTRIK COMBO XLR/TRX | |
| Outputs: SPEAKON | ||
| Power Supply | AC: 110-120V or 220~240V 50/60Hz | |
| Dimension (W x D x H) | 483 x 360 x 88 mm | |
| Weight | 12.0 kg | |
